Kingston DC600M 7.68TB 2.5″ Enterprise SSD

The Kingston DC600M 7.68TB is a 7.68TB, 2.5-inch SSD, built for servers and data centre workloads that run around the clock. Available in Kuwait from AQWACO with prices in Kuwaiti Dinar and local delivery.

High-Density Enterprise Storage Built for Mixed-Use Workloads

The Kingston DC600M SEDC600M/7680G is a 7.68TB 2.5″ SATA 6Gb/s enterprise SSD engineered for data centres, servers, and mixed read/write workloads demanding consistent, high-throughput performance. Designed with power-loss protection and enterprise-grade NAND, it delivers predictable latency and sustained throughput across 24/7 operational environments.

With 560MB/s sequential read and 530MB/s sequential write speeds, the DC600M handles intensive database, virtualisation, and cloud storage workloads without performance degradation. Its 1 DWPD (Drive Writes Per Day) endurance rating and ~14,016 TBW lifespan make it a reliable long-term storage investment for mixed-use server environments where both reads and writes are frequent.

Kingston’s DC600M series is built to meet enterprise SLA requirements, supporting advanced error correction, end-to-end data path protection, and hardware-based encryption — ensuring data integrity at every layer of the storage stack.

Key Details & Benefits

• 7.68TB capacity — high-density storage for large-scale data centre and virtualisation deployments
• SATA 6Gb/s interface, 2.5″ form factor — broad server compatibility with standard hot-swap bays
• 560MB/s read / 530MB/s write sequential throughput — sustained performance under continuous mixed workloads
• 94,000 IOPS read / 34,000 IOPS write — low-latency random access for database and transactional applications
• ~14,016 TBW endurance at 1 DWPD — rated for five-year operational life in mixed read/write environments
• Power-loss protection (PLP) — capacitor-backed design preserves data integrity during unexpected power interruptions
• End-to-end data path protection — error detection and correction across the full data path from host to NAND
• Hardware-based AES 256-bit encryption — TCG Opal 2.0 support for compliance-driven secure data environments
• Temperature monitoring and thermal throttling — maintains stable operation within enterprise thermal envelopes
• Enterprise-grade 3D NAND — consistent cell-level performance and longevity designed for always-on server use

Who Is This For

The Kingston DC600M 7.68TB is built for IT administrators, data centre operators, and enterprise infrastructure teams deploying high-capacity mixed-use storage in rack servers, storage arrays, and virtualisation hosts. It suits organisations running database management systems, cloud workloads, or content delivery networks where both sequential throughput and random IOPS matter. If you need a high-density SATA SSD that meets enterprise endurance, encryption, and data integrity requirements without moving to NVMe infrastructure, the DC600M delivers at scale.

Specialisation

The DC600M’s power-loss protection capacitors and end-to-end data path integrity address the two most critical failure modes in enterprise storage: sudden power loss and silent data corruption. The TCG Opal 2.0 / AES 256-bit hardware encryption removes the CPU overhead of software-based encryption, maintaining full drive throughput even in compliance-mandated secure environments. At 7.68TB in a standard 2.5″ SATA form factor, this drive maximises storage density in existing infrastructure without requiring controller or backplane upgrades — a direct cost advantage over NVMe-only expansion paths.

Comparison Advantage

Unlike consumer or prosumer SSDs, the DC600M is validated for mixed read/write duty cycles at 1 DWPD across a five-year rated lifespan, a specification tier that consumer drives do not carry. Its hardware encryption and PLP capabilities align it with Seagate Exos and Western Digital Ultrastar SATA SSD equivalents, while Kingston’s direct-to-enterprise supply chain and consistent NAND sourcing policy reduce the risk of mid-cycle component substitution. For Kuwait-based data centre operators already running SATA-based storage tiers, the DC600M offers enterprise-class reliability at a lower per-TB cost than equivalent NVMe mixed-use drives.

Specifications

• Model: SEDC600M/7680G
• Capacity: 7.68TB
• Form Factor: 2.5″
• Interface: SATA 6Gb/s
• Sequential Read: 560MB/s
• Sequential Write: 530MB/s
• Random Read IOPS: 94,000
• Random Write IOPS: 34,000
• Endurance (TBW): ~14,016 TBW
• Drive Writes Per Day (DWPD): 1
• Encryption: AES 256-bit, TCG Opal 2.0
• Power-Loss Protection: Yes
• NAND Type: 3D NAND

Specifications

Frequently Asked Questions

What is the storage capacity of the Kingston DC600M 7.68TB?

The Kingston DC600M 7.68TB has 7.68TB of storage capacity.

What size is the Kingston DC600M 7.68TB?

The Kingston DC600M 7.68TB is a 2.5-inch SSD, so check your device has a matching 2.5-inch bay or slot before ordering.

What is the Kingston DC600M 7.68TB best used for?

The Kingston DC600M 7.68TB is designed for servers and data centre workloads that run around the clock.

Can I buy the Kingston DC600M 7.68TB in Kuwait?

Yes. AQWACO stocks the Kingston DC600M 7.68TB in Kuwait, priced in Kuwaiti Dinar (KWD), with delivery available locally.